Hire / Build a hire system
Build a hire system
Speakers and Amplifiers » Amplifiers
The rugged & reliable EV P600 amplifier is capable of 300 watts per channel into a 4 ohm load. Up to 4 of our full range speakers can be run from this amplifier.
There are 2x balanced XLR signal inputs and loop through XLRs for linking to another amplifier. The speaker outputs use Speakon connectors.
We can supply all necessary signal...
Hire Cost: £30.00
The EV P1250 power amplifier is capable of 600 watts per channel into a 4 ohm load. This can comfortably run up to 4 of our full range speakers. The amplifier also has a LPN processor option to increase low frequency gain and can be used to enhance the bass response when using full range speakers for music.
There are 2x balanced XLR inputs...
Hire Cost: £35.00
The Dynacord XA2600 and the PM2600 are 4-channel system amplifiers, which provide an overall output power capacity of 2600 watts.
The amplifier has a built in processor and active cross-over which automatically sends the bass signals to the bass speakers and the mid/hi signals to the top speakers. This way the speakers you use are work...
Hire Cost: £70.00
The new Dynacord XA4000 is a 2 channel amplifier with 1 channel supplying for the Mid/hi boxes and the second channel is for the bass. By having two amps in one rack means you effectively have a 4 channel amplifier system. One amplifier will be for the left and one for the right side of your set-up. The newer XA4000 each have a total ouput power...
Hire Cost: £70.00
A high-output touring amplifier rack consisting of 1x TG5 & 1x TG7 amplifier (RCM-26 cards included). Amplifiers can be programmed for your speakers prior to your event. The perfect amplifier rack for high powered speakers.
Hire Cost: £80.00